Tips for Success:
- To charge, plug the smaller end of the provided charging cable into the USB port on the bottom of the Solawave Wand, and the larger end of the cable into a USB power source (such as a wall charger, car charger, computer or portable battery pack).
- Ensure the power source output is 5V/1A (or 5 watts). The indicator light at the bottom of the Solawave Wand will flash slowly to indicate that charging is in progress.
- Charge the Wand fully for up to 2 hours before the first use, or until the blinking light remains steady.
- Do not overcharge the Wand or charge overnight. Please avoid using "fast chargers", as that will adversely affect the battery life of the Wand.
- To preserve battery health, allow the Wand to deplete before charging. Do not charge after every session if the light at the bottom is not blinking.
- If your Wand is not charging or not holding a charge, please try using a different charging block and outlet than you normally do. If you have a different micro-USB cord, we would suggest trying that as well.
- The length of each session will determine how often the Wand needs to be charged. If you are using the Wand for 5 min each session then you should get about 12 sessions from one full charge. If you use it for the full 30 min each time you should get about two sessions.
For charging instructions for the Radiant Renewal Skincare Wand (V2 Model), please see this article.